Setting The Clock; Clearing Exposure Evaluation - Dräger VarioGard Gebrauchsanweisung

Menu mode

Setting the clock

Setting the clock
The clock only needs to be set if a mode with exposure evaluation has
been selected.
In measurement mode:
u
Press [ ] key.
Enter password (for maintenance or configuration).
u
Press [ ] key to change over to menu mode.
Display:
Use [ q ] or [ l ] key to select the » SET CLOCK « option.
u
Press [ ] key to activate the menu option selected. Display:
Use [ q ] or [ l ] key to set the hour (24-hour format).
Use [ j ] key to move the setting cursor to the minutes.
Use [ q ] or [ l ] key to set the minutes.
u
Press [ ] key if the time set is correct.
– The function is quit and the menu option is displayed again.

Clearing exposure evaluation

In measurement mode:
u
Press [ ] key.
Enter password (for maintenance or configuration).
u
Press [ ] key to change over to menu mode.
Display:
Use [ q ] or [ l ] key to select the » CLEAR EXPOSURE « option.
u
Press [ ] key to activate the menu option selected. Display:
Use [ k ] key to select » y « (yes) if the values for the exposure evaluation
of all the transmitters and converter modules connected to the system bus
are to be cleared.
u
Press [ ] key to clear all values for the exposure evaluation. Display:
u
Press [ ] key to quit the function. The menu option is displayed again.
70
MENU:
MEASUREMENT
MENU:
SET CLOCK
Set clock ?
## : ##
Set clock ?
14 : ##
MENU:
SET CLOCK
MENU:
MEASUREMENT
MENU:
CLEAR EXPOSURE
Clear exposure ?
y / n
Values cleared !
MENU:
CLEAR EXPOSURE