Delivery; Scope Of Delivery; Storage - MICRO-EPSILON optoCONTROL 1201 Betriebsanleitung

Delivery

Weight (without cable)
Protection class
FSO = Full Scale Output
The quoted data apply for a constant room temperature of 20 °C after a warm-up period of 30 min in the range 10 ... 90 % of the ana-
log output at a distance between light source and receiver of 0.5 m.
Analog drift ≤ 0.12 V at constant temperature
If laser beam is covered (without ambient light); analog offset < 0.05 V
1) Increasing the distance, the measurement of hot targets is possible without damaging the controller electronics.
2) For gap measurements 50 - 400 µm there is an controller option available: thrubeam operation with distances up to 700 mm.
3) If a round target moves within the measuring range, the accuracy declines.
4) Shadowing from ambient daylight increases the signal stability.
4. Delivery
4.1

Scope of Delivery

1 Sensor optoCONTROL 120x
2 Laser warning labels in accordance with IEC standards
1 Operating instructions
Check for completeness and shipping damage immediately after unpacking. In case of damage or missing parts, please contact
the manufacturer or supplier.
4.2

Storage

Storage temperature: -20 to +70 °C (-4 to +158 °F)
Humidity: 5 - 95 % (non-condensing)
optoCONTROL 1200/1201
light source appr. 150 g
receiver appr. 120 g
appr. 170 g
appr. 160 g
IP 67
appr. 260 g
appr. 220 g
Page 39