MICRO-EPSILON optoCONTROL 1201 Betriebsanleitung Seite 36

Laser Class
Impairment of color vision and inconvenience may not excluded for Class 1 laser devices, e. g. through glare.
Consequently, you can use Class 1 laser equipment without further protective measures. Class 1 lasers are
not subject to registration and a laser protection officer is not required.
The laser warning label for Germany is included in delivery. The version applicable to the user's country must
be applied before the equipment is used for the first time.
The housing of the light source and receiver may only be opened by the manufacturer. For repair and service
purposes the sensors must always be sent to the manufacturer.
i
Fig. 1 True reproduction of the light source with its actual location of the warning labels
optoCONTROL 1200/1201
If the warning labels are disguised in operation mode the user must add additional warning labels.
Page 36