Product Disposal - Mhouse GDX Serie Anweisungen Und Hinweise Für Die Installation Und Die Bedienung

AUTOMATION COMMISSIONING
Commissioning can only be performed after positive results of all test
phases. Partial or "makeshift" commissioning is strictly prohibited.
1 Prepare the automation technical documentation, which must contain
the following documents: Overall layout drawing (see example in fig. 6,
7, 8), electrical wiring diagram (see example in STEP 6), risk assess-
ment and relative solutions adopted (see forms to be compiled on the
website www.mhouse.biz), manufacturer's declaration of conformity
for all devices used and the declaration of conformity compiled by the
installer (see section TECHNICAL DOCUMENTATION).
2 Affix a dataplate on the door, specifying at least the following data: type
of automation, name and address of manufacturer (responsible for
commissioning), serial number, year of construction and CE mark.
3 Prepare and provide the owner with the declaration of conformity; the
"CE Declaration of conformity" in the section TECHNICAL DOCU-
MENTATION must be compiled for this purpose.
4 Prepare and provide the owner with the form "Operation manual" in
the section TECHNICAL DOCUMENTATION .
In general, this product does not require special maintenance; however,
regular checks over time will ensure system efficiency and correct opera-
tion of the safety systems installed.
This product is an integral part of the automation and therefore must
be disposed together with the latter.
As in installation, also at the end of product lifetime, the disassembly and
scrapping operations must be performed by qualified personnel.
This product comprises various types of materials: some may be recycled
others must be disposed of. Seek information on the recycling and dis-
posal systems envisaged by the local regulations in your area for this
product category.
CAUTION! – some parts of the product may contain pollutant or haz-
ardous substances which, if disposed of into the environment, may cause
serious damage to the environment or physical health.
5 Prepare and provide the owner with the form "Maintenance schedule"
in the section TECHNICAL DOCUMENTATION, containing all mainte-
nance instructions for all devices in the automation .
6 Before commissioning the automation, ensure that the owner is ade-
quately informed of all associated risks and hazards.
7 Permanently affix a label or plate on the door with the image shown in
fig. 46 (minimum height 60 mm) bearing the text "CAUTION: RISK OF
CRUSHING".
46
PERIODIC MAINTENANCE OPERATIONS
Therefore to ensure correct maintenance, refer to the chapter "Mainte-
nance Schedule" in the section "TECHNICAL DOCUMENTATION" at the
end of the manual.

PRODUCT DISPOSAL

As indicated by the symbol alongside, disposal of
this product in domestic waste is strictly prohibit-
ed. Separate the waste into categories for dispos-
al, according to the methods envisaged by current
legislation in your area, or return the product to the
retailer when purchasing a new version.
CAUTION! – Local legislation may envisage serious fines in the event of
abusive disposal of this product.
English – 23