ENGLISH
fi g.8
3.5 ROLLER ASSEMBLY
(Refer to the screw tightening torques chart)
Take out the roller assembly kit from the box. (fi g.8)
Mount the upper adjuster support on the upper bar (fi g.9
and fi g.10); mount the lower adjuster support on the level-
ling bar (fi g.11).
Fix the lower part of the adjuster on the lower adjuster
support by using the nut and the bolt. (fi g.12)
Fix the upper part of the adjuster on the upper supprt by
using the pin and the split pin. (fi g.13)
WARNING
For spike and rice fi eld rollers mount the jack upper
support as shown in fi g.14
60 - EN
USE AND MAINTENANCE
fi g.9
fi g.13
fi g.10
fi g.11
fi g.12
cod. F07011388