maschio ORSO RAPIDO Gebrauch Und Wartung Seite 54

ENGLISH
Maintenance in safety
During work and maintenance operations, use suitable per-
sonal protection gear:
Overalls Gloves
1) Do not proceed with maintenance and cleaning if the power
take-off has not been disconnected fi rst, the engine power off,
the hand brake pulled and the tractor blocked with a wooden
block or stone of the right size under the wheels.
2) Periodically check that the bolts and nuts are tight, and if
necessary tighten them again. For this it would be advisable
to use a torque wrench, respecting the values of 53 Nm for
M10 bolts, resistance class 8.8, and 150 Nm for M14 bolts
resistance class 8.8 (Table SV1).
3) During assembling, main-tenance, cleaning, fi tting, etc., with
the seeding machine raised, place adequate supports under
the equipment as a precaution.
4) The spare parts must correspond to the manufacturer's spe-
cifi cations. Use only original spares.
54 - EN
USE AND MAINTENANCE
Shoes Goggles Hardhat
Tabella SV1
cod. F07011388