Tines - maschio ORSO RAPIDO Gebrauch Und Wartung

ENGLISH
Posizione consigliata della barra livellatrice rispetto al rullo.
Clod bar correct position with respect the roller.
Position conseiller de la barre niveleuse par rapport au rouleau.
Empfehlende lage der Krümelschiene der Walze geggnüber.
Posición aconsejada de la barra niveladora respecto al rodillo.
fi g.65

4.11 TINES

The tines on the machine are suitable for work in soil of a normal
conformation.
These are made of optimum quality steel and the heat treatments
to which they are subjected ensure an extremely tough and wear-
resistant product.
Check their wear and condition each day.
If they should accidentally bend during work (or break), they must
be immediately replaced.
The new tine must be mounted in the identical position to the
damaged one. If several tines must be replaced, it is advisable
to demount and remount one tine at a time in order to prevent
positioning errors.
The cutting side of the tines must always be set in the turning
direction of the rotor (fi g.70).
fi g.70 shows the correct position of the tine cutting edge.
WARNING
It is essential to strictly comply with the indicated assembly
layout (fi g.71) if one or more of the knife supports must be
replaced.
The machine can be fi tted with One-way Quick Release knives,
recommended for all soils, even on hard ground, or two-way knives:
Turning normally for a good job on hard ground (1 fi g.66).
Turning in reverse to work the soil after ploughing (2 fi g.66).
Check their wear and condition each day. If they should accidentally
bend during work (or break), they must be immediately replaced.
It is very easy to replace damaged or worn blades as, thanks to the
quick release system, they can be changed using a special wrench
alone (Code 36100386).
fi g.70
74 - EN
USE AND MAINTENANCE
4÷5 cm
COLTELLO BI-DIREZIONALE - TWO-WAY KNIVE
COUTEAU BIDIRECTIONNEL - ZWEI RICHTUNGEN
ARBEITENDE MESSER - CUCHILLA BI-DIRECCIONALE
1
SODO
HARD GROUND
FERME
BODEN
COMPACTOS
fi g.66
fi g.67
fi g.68
fi g.69
2
ARATO
AFTER PLOUGHING
LABOUR
PFLUG
ARADO
cod. F07011388