Set-Up - MC Crypt L4S Bedienungsanleitung

7. Set-Up

When selecting the installation site, avoid direct sunlight, vibration, dust, hot and cold tempe-
ratures and dampness. Ensure sufficient ventilation when setting up the device with other
equipment. Keep a sufficient distance from heat sources. Do not point any strong spotlights or
light sources towards the device. This may cause overheating (danger of fire!).
Heat dissipation from the device must not be obstructed. Never place the device on any soft sur-
faces such as a carpet or a bed. Air circulation must not be obstructed by objects such as maga-
zines, tablecloths, curtains or similar. This prevents heat dissipation from the device and may
lead to overheating (danger of fire!).
Only operate the device on a sturdy surface that is not sensitive to high temperatures.
When setting up the device, make sure that it has a stable footing and place it on a stable under-
ground. Falling off of the device may injure persons.
The device must not be set up in the vicinity of any devices with strong electric or magnetic
fields, such as transformers, motors, wireless phones, radio devices, etc. since they might
interfere with the device. Keep as much distance as possible to such devices.
Do not drill any holes or screw any additional screws into the device's casing, since this could
cause contact to dangerous voltages.
Make sure that the connection cables are not squeezed or damaged by sharp edges. Always
place cables so that no one can trip over them or be caught in them. Danger of injury!
The cables must be of sufficient length. Do not put any mechanic strain on them. This may
damage the cables or device. There is a risk of dangerous electric shock.
Due to the diversity of furniture paints and polishes used, it is possible that the device's feet will
leave visible residue on furniture due to chemical reaction. The device therefore should not be
placed on valuable furniture surfaces without any suitable protection.
31