Herunterladen Inhalt Inhalt Diese Seite drucken

TERMA SKT 1 Gebrauchsanweisung Seite 61

Elektroheizpatrone
Vorschau ausblenden Andere Handbücher für SKT 1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Warranty Terms & Conditions
1.
The subject of this warranty is a device using Terma-Split system. Product
name and characteristics are specified on the packaging.
2.
By accepting the device on purchase, the Client confirms that the product is of
full value. The Client should immediately inform the Seller of any discovered
faults – otherwise it will be understood that the Product was faultless at the
time of purchase. This refers especially to any faults or damages to the
controller casing.
3.
Warranty period for the Product is 24 months from the date of purchase, but no
longer than 36 months from date of production.
4.
Any claims made will be processed on production of the warranty card and
evidence of purchase. Manufacturer has the right to reject any claim on the
grounds of not presenting of any of the above documents.
5.
This warranty does not comprise any faults that are due to:
incorrect (not in accordance with the manual) installation, use or
disassembly,
incorrect use of the heating element,
Product being handled by unauthorized persons,
any faults or damages caused by the Client after having purchased and
accepted the Product.
6.
Central heating installation should be fitted with lock-shield valves, enabling
disassembly of the radiator or the heating element and its control head without
the necessity of emptying the whole system of the heating medium. Any
problems or expenses arising from lack of such valves in the installation cannot
be used as the grounds for any claims against Terma.
7.
The attached Product Manual is an integral element of the Warranty. Please
read it carefully prior to the Product installation and use.
8.
The Manufacturer is obliged to remove any production fault within 14 working
days from receipt of the faulty device to Manufacturer's premises.
9.
Should the repair turn out impossible, Manufacturer is obliged to replace the
faulty Product with a new, full-value unit of identical parameters.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Skt 2Skt 3Skt 4

Inhaltsverzeichnis