TERMA SKT 1 Gebrauchsanweisung Seite 59

Controller does not Communication problem:
react to the IR IR communication window
transmitter signal may be covered in one of
the devices or the devices
are not correctly set.
Incorrect setting of
transmitter and receiver
addresses
LED screen fades Device works correctly – in
when the buttons are selected versions, display
not in use screen automatically fades
after manual setting is
finished
If the problem persists, please contact your local Distributor
Remove any obstacles
causing communication
interference or place the
IR transmitter in a different
location.
See: MODIFICATION OF
SKT 4 CONTROLLER
ADDRESS
–