Product Specification; Certificates - Mettler Toledo InPro 6850 i Bedienungsanleitung

InPro 6850 i / 6900 i / 6950 i O
8

Product specification

8.1

Certificates

Each sensor is delivered with a set of 3.1 certifi-
cates (complying with EN 10204).
All wetted metal parts (sensor shaft, cap sleeve and
membrane body) are identified with a engraved
s ymbol corresponding to the heat number on the
p aper c ertificate delivered with the sensor.
Each wetted metal part (sensor shaft, cap sleeve and
membrane body) is polished in order to get a surface
roughness lower than 0.4 µm (16 µin). This repre-
sents a roughness grade number of N5 (according to
ISO 1320:1992).
© 04 / 13 Mettler-Toledo AG
Printed in Switzerland
Sensor 12 / 25 mm
2
InPro 6850 i / 6900 i / 6950 i
27
52 206 349