InPro 6000 Series Optical O
8
Product specification
8.1
Certificates
Each sensor is delivered with a set of 3.1 certificates
(complying with EN 10204.3 / 1.B).
All wetted metal parts (sensor shaft, cap sleeve and
OptoCap) are identified with a engraved symbol corre-
sponding to the heat number on the paper certificate
delivered with the sensor.
Each wetted metal part (sensor shaft, cap sleeve and
OptoCap) is polished in order to get a surface roughness
lower than 0.4 µm (16 µin). This represents a roughness
grade number of N5 (according to ISO1320:1992).
© 07 / 12 Mettler-Toledo AG
Printed in Switzerland
Sensors 12 mm
2
InPro 6000 optical O
25
sensors
2
52 206 256