Product Specification; Specifications; Ordering Information; Sensor Heads - Mettler Toledo InSUS H60i Bedienungsanleitung

InSUS H60i
8

Product Specification

8�1

Specifications

Measurement principle
Power requirements
Analog / digital interface
nA output (InSUS H60i nA)
mA output (InSUS H60i mA)
Analog temperature output
Digital interface
Design features
Temperature compensation Automatic with built-in RTD
Cable connection
Certificates / Compliances
Quality certificate
Declaration of Conformity
(CE, UKCA)
Material certificate 3.1
Performance together
with optical InSUS O
single-use sensor
Measuring range
Accuracy under defined
laboratory conditions
Response time
Operating temperature
Sensor connection
9

Ordering information

For more detailed information ask your local distributor.
9�1

Sensor Heads

InSUS H60i nA
InSUS H60i mA
9�2

Sensors

InSUS 607
InSUS 607 set of 10
© 09 / 2022 METTLER TOLEDO
Printed in Switzerland
InSUS H60i
Optical
U = 19.5 VDC
min
U = ≤ 25 VDC
max
P = 0.75 W (33 ... 40 mA)
max
60 nA at air (25 °C, 1013 mbar)
4 ... 20 mA (active)
NTC 22 kΩ
Modbus RTU on RS485
• Baudrate:
4800, 9600, 19200 (default),
38400, 56600, 115000
• Device address:
1 (default) to 32
VP8
Yes
Yes
Yes
2
0 ... 250 % air
< 2.5 % for the range 50 –100 %
air after 1-point calibration in
100 % air
<1 % after 2-point calibration in
100 % air and 0 % oxygen
25 °C (77 °F) air →
nitrogen, t98 % < 30 s
5 ... 60 °C (41 ... 140 °F)
M16x1
15
30 788 856
30 788 857
30 778 198
30 778 199
InSUS H60i
30 802 188 A