Product Specification; Certificates - Mettler Toledo InPro 6950 Serie Bedienungsanleitung

30
8 Product specification

8.1 Certificates

Each sensor is delivered with a set of 3.1 certificates
(complying with EN 10204).
All wetted metal parts (sensor shaft, cap sleeve and
membrane body) are identified with a engraved
symbol corresponding to the heat number on the
p aper c ertificate delivered with the sensor.
Each wetted metal part (sensor shaft, cap sleeve and
membrane body) is polished in order to get a surface
roughness lower than 0.4 µm (16 µin). This rep-
resents a roughness grade number of N5 (according
to ISO 1320:1992).
InPro 6950
52 206 137 F
InPro 6950 Series O
© 02 / 2023 METTLER TOLEDO
Sensor 12 mm
2
Printed in Switzerland