Working With Your Machine - Stihl RT 4082 Gebrauchsanleitung

damage, do not start the engine – fire
hazard!
Have the machine repaired by a specialist
dealer prior to operation.
Observe the local regulations regarding
permitted operating times for gardening
power tools with combustion engines.
Carefully inspect the complete area on
which the machine is to be used and
remove any stones, sticks, wires, bones
and other foreign objects which could be
thrown up by the machine. Obstacles (e.g.
tree stumps, roots) can be easily
overlooked in long grass.
For this reason, mark all foreign objects
(obstacles) which are hidden in the lawn
and cannot be removed before
commencing work with the machine.
All faulty, worn or damaged parts must be
replaced before using the machine.
Replace any illegible or damaged danger
signs and warnings on the machine. Your
STIHL specialist has a supply of
replacement stickers and all the other
spare parts.
Never use the machine with damaged
safety devices or with safety devices
removed.
The screwed-on discharge port (discharge
chute on mowing deck) must always be
securely fastened to the mowing deck. It
must not be damaged and, if necessary, it
must be replaced by a technician.
The braking function must be checked
before each use. ( 12.5)
Before each use, check whether:
68
– the cutting tool and the entire cutting
unit (mowing blade, blade clutch, blade
brake, retaining pin, mowing deck
housing) are in good condition.
Particularly check for secure fastening,
damage and wear.
– the tank cap is securely attached.
– the tank and fuel-carrying parts as well
as the tank cap are in good condition.
– the safety devices are in good condition
and function correctly.
– the tyres (inflation pressure, damage,
wear) and frame are in good condition.
Check that all screw connections are
securely fastened. In particular, all
maintenance operations listed in the
maintenance schedule under the
heading "Before each use" must be
carried out. ( 14.1)
If necessary, consult a specialist dealer.
STIHL recommends STIHL specialist
dealers.

4.7 Working with your machine

Never work in the vicinity of
other persons, particularly
children, or animals. Ensure
that the grass is never
discharged in the direction of other
persons.
Do not operate the machine in the rain or
during thunder storms, particularly when
there is a risk of lightning strike.
Exhaust gases:
Danger to life through poisoning!
In the case of nausea, headache,
impaired vision (e.g. decreasing
field of view) hearing disorder,
dizziness, decreasing power of
concentration, stop working
immediately. These symptoms may
be caused by excessively high
exhaust gas concentrations.
The machine generates
poisonous exhaust gases when
the engine is running. The
gases contain poisonous
carbon monoxide, a colourless and
odourless gas, as well as other pollutants.
The engine must never be operated in
closed or poorly ventilated spaces.
The engine exhaust is released into the air
in front of the left rear wheel. When
working with the machine, ensure that this
area is always kept clean and is never
covered in order to prevent the
accumulation of exhaust gasses.
Starting:
The machine must only be started from the
driver's seat.
Start the machine on level ground, not on
a slope.
The engine may only be started in a well
ventilated working area, sufficient
ventilation must be ensured, particularly in
garages.
Before starting the engine, disengage the
cutting tool, attachments and drive and
press down the brake pedal fully.
When starting, it must be ensured that
there is sufficient clearance between the
feet and the cutting tool.
0478 193 9904 A - EN