Electrical Connection Of The P2Va1/A2 - HBM P2VA2 Montageanleitung

5

Electrical connection of the P2VA1/A2

Supply voltage 15 to 30 V DC
Supply voltage 0 V
Output 0.5 to 10 V (4 to 20 mA for the P2VA2)
Output 0 V
Transducer identification TEDS DATA
5
4
1
P2V
An external amplifier is connected to the P2V in accor­
dance with Fig. 5.1.
Notice
The inputs and outputs of the P2V are protected against
short circuits and reverse polarity.
1)
2)
Connections 2 and 3 are internally linked.
3
1)
Operating on a SELV circuit (separated extra-low voltage)
2)
also ground for TEDS
2
Fig. 5.1
A1564-7.0 HBM: public
Electrical connection of the P2VA1/A2
1
3
4
2
5
Pin assignment of the P2V
brown
blue
Connection
black
cable wire
white
assignments
gray
13