HBM P2VA2 Montageanleitung Seite 7

Symbol
DANGER
WARNING
CAUTION
Notice
Emphasis
See....
P2V
Remaining dangers are indicated in this operating man­
ual by the following symbols:
Significance
Warns of an imminently dangerous situation in which
failure to comply with safety requirements will result in
death or serious physical injury.
This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in death or serious physical
injury.
This marking warns of a potentially dangerous
situation in which failure to comply with safety
requirements can result in slight or moderate physical
injury.
This marking draws your attention to a situation in
which failure to comply with safety requirements can
lead to damage to property.
Italics are used to emphasize and highlight text and
references to other chapters and external documents.
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the rele­
vant EC directives (the Declaration of Conformity can be
found at http://www.hbm.com/HBMdoc).
Conversions and modifications
The P2V/xxx pressure transducer must not be modified
from the design or safety engineering point of view
except with our express agreement. Any modification
shall exclude all liability on our part for any damage
resulting there from.
A1564-7.0 HBM: public
Safety instructions
5