HBM P2VA2 Montageanleitung Seite 12

Application
Enclosure
10
P
U
Fig. 3.1
Blow-off opening
The transducer housing features a blow-off opening
under the blue label (see figure):
Blow-off opening
This safety device enables overpressure to be reduced in
a controlled way in the event of bursting of the sensing
element. This prevents overloading of the sensor hous­
ing. The blow-off opening opens at approx. 10 bar.
A1564-7.0 HBM: public
Electrical connection diagram
+U
B
+U /I
out out
0 V
Enclosure
P2V