HBM P2VA2 Montageanleitung Seite 16

Electrical connection of the P2VA1/A2
14
CAUTION
Using the TEDS memory: Because of the electrical spec­
ifications, voltages > 6 V must never be applied to the
TEDS memory. Never connect the supply voltage of the
P2V with TEDS pin 5. This would destroy the memory.
If the P2V is connected with the HBM MGCplus amplifier
system, the connection is made via AP01i, as shown in
Fig. 5.2.
A1564-7.0 HBM: public
P2V