HBM P2VA2 Montageanleitung Seite 28

Specifications
26
Sealing joint (to customer design)
S 3000 bar and higher:
M16x1.5 internally: High-pressure screw connector
M16x1.5, for example, from Nova Swiss. The trans­
ducer has a relief aperture, which exits in the center
of a hexagonal face.
S Less than 3000 bar:
G1/4" externally (using the conical seals 58 degree
with retaining spring included for these measuring
ranges): The depth to the root of the line aperture
should be 17 mm, the thread must be at least
13.5 mm long. The diameter of the line aperture
should be 4 mm sharp-edged or with a margin (max.
0.5x45°) of 5 mm.
S Possible up to 1000 bar:
Under the hexagon, sealing is provided by a Usit ring,
14.7x22x1.5. The ring must be centered and sup­
ported by a recess with a depth of 1.3 mm and a
diameter of 22.2 "0.1 mm.
A1564-7.0 HBM: public
P2V