Switching Off The Sauna Control Unit; Extended Periods Of Non-Use; How The Optional Door Monitoring Works - Sentiotec K2 Next Montage- Und Gebrauchsanweisungen

Instructions for use for the user

9.6. Switching off the sauna control unit

To turn off the sauna control unit after using the sauna, press the ON/OFF
switch 4.
► The control light 1 goes out.

9.7. Extended periods of non-use

If you will not be using the sauna for an extended period of time, switch the main
fuse of the sauna control off in the fuse box.

9.8. How the optional door monitoring works

During the preset time
If a person enters the sauna cabin while the timer is running, they might place
flammable objects on the cold sauna heater. Once the preset time begins, the
sauna heater begins to heat the cabin. Flammable objects on the sauna heater
ignite and cause a fire. The door monitoring is meant to prevent this.
The preset time was set (see point 9.4).
► The timer is running and the sauna heater is not yet heating up.
The cabin door is opened.
► A repeated beep can be heard.
► The message "door" appears in the display 6.
► The preset time is deleted.
► After closing of the cabin door, the preset time must be set again.
While the sauna heater is heating
The cabin temperature is below 40 °C, and the cabin door is opened.
► A repeated beep can be heard.
► The message "door" appears in the display 6.
► After closing of the cabin door, the sauna control unit must be
started again.
p. 19/26
EN