Dialing On Receiving A Call - Motorola TETRA MTP850 Ex Bedienungsanleitung

tone (if configured) before talking, and release the PTT when
listening.
3. The call ends after a pre-programmed time, or if you
press
There is no presence check for Private Calls in DMO. This
means you don't know whether the called party is available
when you start the call.
Receiving a DMO Private Call
When a DMO Private Call is received, the call
is started immediately without need to accept
it by the called party.
1. Press PTT to talk back and start talking.
2. The call ends after a pre-programmed time,
or if you press
If the called party presses
for a specified time and in case the calling party is still
transmitting the call is joined again.

Dialing on receiving a call

If you dial and a call is incoming, MTP850 Ex/MTP810 Ex
display remains unchanged while you hear the call. Dialing
continues on current display.
When an Emergency Call is received, then dialing is aborted
and Emgcy In Use display appears.
.
.
the DMO private call is suspended
Prvt In Use
David
1234
63