Making A Dmo Group Call (Ms To Ms); Making A Dmo Group Call Via Gateway; Making A Dmo Group Call Via Repeater - Motorola TETRA MTP850 Ex Bedienungsanleitung

Making a DMO Group Call (MS to MS)

1. Enter Direct Mode by pressing Optns and
selecting Direct Mode
2. Make sure that you have selected the
required group. Press and hold the PTT
button.
3. Wait for the talk permit tone and then speak
into the microphone. Release the PTT button to listen.

Making a DMO Group Call via Gateway

1. While in DMO, choose a gateway as described in "Select-
ing DMO Group Call via Gateway" on page 53.
2. Place the call for the selected talkgroup:
• If you press PTT while the gateway is not available, you
will start a DMO call without gateway. The Gateway icon
will disappear.
• If you press PTT while the selected
gateway is available, but the call is
rejected by the gateway, your MTP850
Ex/MTP810 Ex will sound a tone and
display the following screen, informing
you that the call will be setup without gateway. The
Gateway icon will disappear.
• If you press PTT while the gateway is available, you will
start a DMO call with gateway. The Gateway icon will be
solid.

Making a DMO Group Call via Repeater

1. While in DMO, choose the Repeater option as described in
"Selecting DMO Group Call via Repeater" on page 54.
2. Place the call for the selected talkgroup:
• If you press PTT while the repeater is not available, you
will start a DMO call without repeater. The Repeater
icon will disappear.
56
.
DMO Folder 1
Police
Hello
Optns Contcs
MS - MS
Call