Packet Data - Motorola TETRA MTP850 Ex Bedienungsanleitung

When the MTP850 Ex/MTP810 Ex receives a Local Area
Service indication from the system, the following occurs:
• The MTP850 Ex/MTP810 Ex sounds a tone.
• The display shows the "Local Area Service" message.
• Display icons and soft keys turn brown.
• Any call in progress is dropped upon entering Local Area
Service mode.
If configured by your Service Provider, this message/alert is
periodically repeated to remind you that the MTP850 Ex/
MTP810 Ex is still operating in Local Area Service mode.
The following features are available while the MTP850 Ex/
MTP810 Ex is in Local Area Service:
• Registration
• Attachment
• Group Call
• Emergency Call
• Emergency Alarm
Exiting Local Area Service
When the link with the central network controller is re-
established, the MTP850 Ex/MTP810 Ex exits Local Area
Service and the following occurs:
• the MTP850 Ex/MTP810 Ex sounds a tone
• any call in progress during Local Area Service is dropped.

Packet Data

The Packet Data (PD) Service allows you to transfer data in a
TETRA system using the Internet Protocol (IP). Check with
your Service Provider for the availability of this feature.
For transferring data from a standard computer over the air
connect the computer via the Active Data Cable FKN4897 with
your MTP850 Ex/MTP810 Ex. Your Service Provider has to
setup additional applications on your computer.
36