Making A Dmo Group Call Via Gateway And Repeater - Motorola TETRA MTP850 Ex Bedienungsanleitung

• If you press PTT while the selected
repeater is available, but the call is
rejected by the repeater your MTP850
Ex/MTP810 Ex will sound a tone and
display the following screen, informing
you that the call will be setup without gateway. The
Repeater icon will disappear.
• If you press PTT while the repeater is available, you will
start a DMO call with repeater. The Repeater icon will
be solid.

Making a DMO Group Call via Gateway and Repeater

1. While in DMO, choose the Gateway and Repeater option
as described in "Selecting DMO Group Call via Gateway
and Repeater" on page 55.
2. Place the call for the selected talkgroup:
• If you press PTT while both gateway and repeater are
not available, you will start a DMO call without gateway
and repeater. The Gateway and Repeater icons will dis-
appear.
• If you press PTT while both gateway and repeater are
available, but the call is rejected by the gateway, a
repeater call will be attempted.
> If it is successful your MTP850 Ex/MTP810 Ex will
display the message Repeater Call and a call via
repeater will proceed. The Gateway icon will disap-
pear.
> If it is not successful your MTP850 Ex/MTP810 Ex
will display the message MS-MS Call and a terminal
to terminal call will proceed. The Gateway and
Repeater icons will disappear.
• If you press PTT while both gateway and repeater are
available, a gateway call will be attempted.
> If it is successful your MTP850 Ex/MTP810 Ex will
start a DMO call with gateway. The Gateway icon will
be solid. The Repeater icon will disappear.
MS - MS
Call
57