Private Call
General
A Private Call, also called Point-to-Point or individual call, is a
call between two individuals. No other terminal can hear the
conversation.
This call can be a
• duplex call (if the system allows) in TMO, or
• a simplex call in TMO or DMO.
In a duplex call, both participants can speak at the same
time, while in a simplex call, only one person can speak at a
time.
It is not possible to create a new contact, edit existing contacts
or dial up a number which is not in the Contacts list.
For operating the MTP850 Ex/MTP810 Ex in RF sensitive
areas, see "Transmit Inhibit" on page 46.
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but it is not possible to answer the call.
Dual Microphone Feature
See "How to Hold Your MTP850 Ex/MTP810 Ex" on page 16.
Making a Private Call in TMO
If you are in an on-going Group Call and wish to make a new
call, press
Dialing via Contact List
Use the contact list to select a number that has been
previously stored. Press Contcs and search the stored
number by scrolling (
While Transmit Inhibit is activated, an incoming Private Call is
indicated, but you cannot answer the call.
to ignore the current call.
or
).
61