Sending A Status Message To A Group; Targeted Status - Motorola TETRA MTP850 Ex Bedienungsanleitung

• Message Delivered – to indicate that the message was
successfully sent and received.
• Message Failed – the message was not received.
3. After sending the message, your MTP850 Ex/MTP810 Ex
will return to the predefined template list or to the message
editor screen.
It is recommended to wait for the message acknowledge before
sending a new message.

Sending a Status Message to a Group

1. Switch to the desired talkgroup, to which you want to send
a status message.
2. From the main menu, select Messages > Send Status
3. In this example,
If you wish to send a different status, scroll
to your selection in the list of pre-
programmed statuses, or key the status
number. To stop scrolling, press Back. The
display returns to the select status list.
4. Press
return to the status list.
5. Press Select, then press PTT or
touch numeric key to send the status message.

Targeted Status

If your Service Provider has enabled the Targeted Status
feature, the status sending display will show you the option of
sending your status to a private number or to a group.
To enter the private number, scroll through the list of
numbers. For a group, select the group within the folder.
Then send the status message.
The display will show one of the following delivery reports:
• Status Sent – the screen exits the status screen.
148
is the last sent status.
Lunch
to view the status message. Press Back to
MENU
Select Status
Lunch
Dinner
Meeting
Select
or the relevant one-
,
.
Back