Entering Gps Location Service; Viewing Your Position - Motorola TETRA MTP850 Ex Bedienungsanleitung

Entering GPS Location Service

To enter the GPS sub-menu, press
and select More...> Location:
• Position provides the actual position
information.
• Interface allows you to enable/disable the
GPS location service.
• Setting Accuracy allows you to select high location
accuracy or the energy optimised mode for GPS location
service if the MTP850 Ex/MTP810 Ex is not connected to
a charging device (Digital Car Kit or charger etc.).
Scroll to your selection and press Select to access the next
display.
This estimate of accuracy of the calculated location is only a
very rough estimate and may vary substantially from the
actual accuracy of the approximate location information
reported.
• The variation will vary in accordance to the GPS
Configuration set by your Service Provider.
• The availability of the GPS Location menus is dependent on
your terminal configuration, please contact your Service
Provider for further details.

Viewing Your Position

1. From the main menu, select More...
> Location > Position.
2. Scroll to view the entire screen.
This displays the following information about
the last time your location was calculated (if
available):
• The time the location was last calculated
• The latitude expressed in degrees, minutes, and seconds
• The longitude expressed in degrees, minutes, and
seconds
100
MENU
Location
Position
Interface
Accuracy
Select
Position
<Time>
<Latitude>
<Longitude>
<Tracked satellites>
Rfrsh
Back
Back