Receiving A Dmo Group Call - Motorola TETRA MTP850 Ex Bedienungsanleitung

> If synchronising with a gateway is not successful a
repeater call will be attempted.
> If it is successful your MTP850 Ex/MTP810 Ex will
display the message Repeater Call and a repeater
call will proceed. The Gateway icon will disappear
and the Repeater icons will be solid.
> If it is not successful your MTP850 Ex/MTP810 Ex
will display the message MS-MS Call and a terminal
to terminal call will proceed. The Gateway and
Repeater icons will disappear.
If Gateway and Repeater mode is selected, and if one of the
devices is not available, the call setup is proceeding as if this
device was not selected.
Example: In case of the Gateway is available and the Repeater
is not available, after an unsuccessful Gateway call attempt the
call falls back to MS - MS mode immediately with the MS-MS
call message.

Receiving a DMO Group Call

You can receive a DMO Group Call only when your MTP850
Ex/MTP810 Ex is in DMO.
Your MTP850 Ex/MTP810 Ex will display the caller's private
number or alias, and the talkgroup name.
The following screens show examples of how the caller's
identity can be displayed.
For call alert, see settings in the Tones menu option (page 118)
Receiving a DMO Group Call (MS - MS)
Group In Use
DMO Folder 1
DMO TG4
Optns
Without alias and
Private ID
58
Group In Use
ID:124
OR
DMO TG4
Optns
Private ID
without alias
Group In Use
ID: David
OR
DMO TG4
Optns
Private ID
with alias
.