CAKEWALK Z3TA+ 2.1 Bedienungsanleitung Seite 29

Transformation Description
Bit Reduction Bit reduction.
Adjusts the bit depth in a 1-32 bit range.
Shrink Shrinks the whole cycle, filling the rest with zeros.
SelfSync Stretches the whole cycle, filling the rest with the same waveform after stretching.
Produces a sound similar to “"hard-sync”" inter-modulation mode.
Multipoint Makes the waveform zero at three points.
The control adjusts the width of the zeroed section.
LPF Lowpass Filtering
HPF Highpass Filtering
Fold Folds the entire waveform over itself by progressively swapping the left and right halves.
Spectrum Causes a waveform’' s harmonic levels to wander in alternating directions creating a
complex phaser-like quality.
Random All Creates continuously random waveform variations by allowing all harmonic levels (even
and odd) to wander as the control is manipulated.
Random Odd Same as “"Random All”" except only odd harmonic levels are randomized, while even
harmonics are progressively suppressed.
Table 11. Shaper transformations (Continued)
You can reset all transformations in the Shaper at once. To perform this operation, right-click on the
waveform display in the Shaper window and select the Reset all shapers option.
You can also export a wavetable in its current state. To do so, right-click the waveform display in the
Shaper window and select Save Wavetable As.
To copy and paste waveforms between different oscillators, right-click the waveform display in the
Shaper window and select Copy or Paste.
All Range controls in the Shaper can be assigned to MIDI controls with adjustable range. For more
information about this, see “"MIDI Learn”" on page 64.
The transformations in any oscillator can be copied and pasted to other oscillators. For more
information on this, see “"Copy and Paste functions”" on page 65.
The Synthesizer
29