CAKEWALK Z3TA+ 2.1 Bedienungsanleitung Seite 24

Mode Description
SMULTI Synchronized Multi mode.
This mode turns the oscillator into eight simultaneous oscillators.The oscillators' detune
amount is controlled with the Phase slider. Four oscillators output are sent to Bus1, and four
to Bus2, spreading the output in the stereo field (if the filters are hard-panned to L and R).
In this mode, the phase is restarted on every Note-On event.
FMULTI Free running, Multi mode.
Same as SMULTI, but oscillators' phase isn’'t restarted on Note-On events.
SFIX Fixed frequency.
In this mode the oscillator pitch won’'t follow the keyboard, generating a fixed tone instead.
Phase is restarted on Note-On events.
FFIX Fixed Frequency.
Same as before, but oscillator phase won’'t restart on Note-On events.
Table 8. Oscillator modes (Continued)
Oscillator modulation modes
Mode Description
ADD Normal oscillator mode.
The output of the oscillator is sent directly to mixing buses according to the Bus setting, and
no modulation is performed.
RING Ring modulation.
The output of this oscillator is used to ring-modulate the next one in the circular chain.
SYNC Hard sync modulation.
The next oscillator in the chain will be “"slave”" of this oscillator, so it will restart its phase
every time this oscillator restarts.
PM Phase modulation.
Next oscillator phase will be modulated with the output of this oscillator.
FM Analog frequency modulation.
The frequency of the next oscillator in the chain will be modulated with the output of this
oscillator.
Table 9. Oscillator modulation modes
24
The Synthesizer