CAKEWALK Z3TA+ 2.1 Bedienungsanleitung Seite 25

Performance
Figure 12. Performance section
A
This sub-page in the Oscillators section includes settings that will affect the output of all oscillators
together, as follows:
Global parameter Description
Bend Mode Pitch Bend mode:
•• Low: When playing a chord, only the lowest-pitched note is bent.
•• High: When playing a chord, only the highest-pitched note is bent.
•• Hold: Only pressed keys (not including the ones in release stage or those held with
•• Normal: Standard pitch bend mode.
••
Bend Up -12 to +12 scale degrees. When Bend Scale is set to Chromatic, the bend range is -12
to +12 semitones, in 1-semitone steps.
Interval to bend when the Bend wheel is turned fully up.
Bend Down -12 to +12 scale degrees. When Bend Scale is set to Chromatic, the bend range is -12
to +12 semitones, in 1-semitone steps.
Interval to bend when the bend wheel is turned fully down.
Bend Scale Defines what scale to pitch bend to. Move up or down however many notes through
the selected scale depending on the Bend Up and Bend Down selections.
Left clicking the display advances through values, right clicking goes backwards.
The Adaptive mode attempts to automatically determines which scale you are playing.
Bend Root Choose the root note of the Bend Scale.
Clicking on arrow reveals a drop-down menu. Left clicking the display advances
through values, right clicking goes backwards.
Table 10. Oscillator Performance settings
The Synthesizer
sustain switch) are bent.
25