Bios-Menü „Chipset", Bildschirm „Northbridge Configuration; Bios-Menü „Chipset", Bildschirm „Memory Configuration" Für Northbridge - Sun Microsystems Sun Fire X4100 Handbuch

2.4.4.27 BIOS-Menü „Chipset", Bildschirm „NorthBridge
Configuration"
********************************************************************************
* NorthBridge Chipset Configuration
* *************************************************** *
* * Memory Configuration
* * ECC Configuration
* * IOMMU Option Menu
* Power Down Control
* *************************************************** *
* Memory Timing Parameters
* Memory CLK
* CAS Latency(Tcl)
* RAS/CAS Delay(Trcd)
* Min Active RAS(Tras)
* Row Precharge Time(Trp):3 CLK
* RAS/RAS Delay(Trrd)
* Row Cycle (Trc)
* Row Refresh Cycle(Trfc):14 CLK
* Read Write Delay(Trwt) :4 CLK
* Read Preamble
* Asynchronous Latency
*
********************************************************************************S
2.4.4.28 BIOS-Menü „Chipset", Bildschirm „Memory Configuration"
für NorthBridge
********************************************************************************
* Memory Configuration
* *************************************************** * by the code using
* Memclock Mode
* MCT Timing Mode
* User Config Mode
* Bank Interleaving
* Burst Length
* Enable Clock to All DIMMs
* SoftWare Memory Hole
* HardWare Memory Hole
* Node Interleaving
*
*
*
*
*
*
*
*
*
********************************************************************************S
2-24 Sun Fire X4100 und Sun Fire X4200 Server Einrichtungs- und Wartungshandbuch • November 2005
[Auto]
[CPU Node 0]
:200 MHz
:3.0
:3 CLK
:8 CLK
:2 CLK
:11 CLK
:7.0 ns
:8 ns
[Auto]
[Auto]
[Auto]
[Auto]
[4 Beats]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Chipset
*
*
*
*
*
*
*
*
*
*
* ** Select Screen
* ** Select Item
* Enter Go to Sub Screen *
* F1 General Help
* F10 Save and Exit
* ESC Exit
*
*
Chipset
* MEMCLK can be set
* AUTO, or if you use
* LIMIT, you can set
* one of the standard
* values.
*
*
*
*
*
*
* ** Select Screen
* ** Select Item
* +- Change Option
* F1 General Help
* F10 Save and Exit
* ESC Exit
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*