EdilKamin BASIC Installations-, Betriebs- Und Wartungsanleitung Seite 36

MAGIC
88
70
29
25
115
72
132
70
114
132
26
72
70
27
132
113
MAGIC
88
88
73
29
85
3 29
85
86
86
86
29
29
6
72
27
72
88
85
86
screw
MOUNTING THE COVERING
ESPRIT
111
34
130
130
88
36
25
115
86
86
114
26
27
27
27
131
113
37
MAGIC
73
73
139
72
86
72
19
85
29
85
86
72
86
72
72
72
Detail Z
72
72
2 Screws
bushings
14
ESPRIT
111
INCLUDED HARDWARE:
111
2 M6x25 screws
131
34
34
34
2 M6x12 screws
34
130
4 silicone spacers for ceramic top
86
88
8 flat washers M6
36
37
36
2 bushings
115
115
112
86
The thermo-stove comes furnished with its lateral metal
side panels already assembled, while its ceramic upper
and lower front panels (72) and top (73) must be assem-
114
bled as follows:
114
ASSEMBLING THE UPPER FRONT PANEL
130
Pull the cast iron upper grille upwards (19).
131
112
Position the upper front panel (72) against the metallic
113
front panel support located above the door.
131
37
113
Use an Allen key to fasten the front panel in place using
36
the 2 supplied M6x25 screws and the 2 supplied M6
37
washers (the door must be opened before performing this
operation).
NOTE:
86
86
85
85
29
In order to correctly install the upper front panel (72), the
29
supplied bushing must be positioned between it and the
86
86
metallic front panel (14), as indicated in detail "Z".
ASSEMBLING THE LOWER FRONT PANEL
Position the front panel (72) and use an Allen key to
fasten it in place using the 2 supplied M6x25 screws and
the 2 supplied M6 washers, as indicated in detail "X".
ASSEMBLING THE CERAMIC TOP (73).
• insert the 4 ceramics spacers into the 4 free respective
holes in the cast iron top
• position the ceramic top (73) to make sure it rests pro-
perly
• if necessary, insert a washer between the silicone spacer
and the cast iron top.
86
NOTE:
If the metal side panels need to be removed, do the fol-
lowing:
85
Remove the ceramic top (73) and disassemble the rear
panel (27), the two profiles (29) and the cast iron top
along with the plate (139).
86
At this point the side panels (85) can be extracted, by
pulling them upwards, along with the 4 aluminium
uprights (86-88).
Detail X
36
ESPRIT
131
131
34
86
86
37
37
115
115
112 112
86
86
114
114
130
112
130
112
113
36
113
36
86