Operating The Set Menu - Yamaha DSP-AX2 Bedienungsanleitung

SET MENU Items

Operating the SET MENU

Adjustment should be performed with the remote control. Some items require extra steps to change to the desired setting.
1 Set PARAMETER/SET MENU to SET MENU.
1
2 Press h or g repeatedly to select an item from the table of SET MENU, then press + or – to enter the setting of that item.
2
• The last item you adjusted appears on the display.
• Some items have sub items.
3 Press + or – to change the setting of the item.
3
4 Press h or g repeatedly or a DSP program button to exit the SET MENU.
4
32
OSD (On Screen Display)
SET MENU 1/4
1 SPEAKER SET
≥ 2 LOW FREQ.TEST
3 L/R BALANCE
4 HP TONE CTRL
≥ TEST TONE.........OFF
2 LOW FREQ.TEST
TEST TONE.........OFF
or
PARAMETER / SET MENU
Cursor buttons
Front Panel Display
2 LOW FREQ.TEST
-/+ : Enter
2 LOW FREQ.TEST
OUTPUT...MAIN L/R
FREQ...................88Hz