Turning On The Unit In Conjunction With Operating Other Devices (Trigger Function) - Yamaha MX-A5000 Bedienungsanleitung

Turning on the unit in conjunction with operating other devices (trigger function)

The trigger function can control power of the unit in conjunction with operating other
devices or control power of other devices in conjunction with turning on/off the unit. If
you have a power amplifier or a Yamaha subwoofer that supports the trigger function,
you can use the trigger function by connecting your devices to the TRIGGER jacks with
the supplied system control cable.
Depending on the intended use, connect your device to one of the following TRIGGER
jacks.
IN jack:
For connecting a device that supports the trigger output function (such as a
pre-amplifier).
If you turn on/off your device, the unit will automatically turns on/off (standby).
• This function is available only when z (power) of the unit is on (pressed down).
THROUGH OUT jack:
This jack outputs signals input from the IN jack.
If you connect a device that supports the trigger input function (such as another power
amplifier), your device will automatically turn on/off in conjunction with turning on/off the
device connected to the IN jack.
OUT jack:
For connecting a device that supports the trigger input function (such as a subwoofer).
If you turn on/off (standby) the unit, your device will automatically turns on/off.
TRIGGER
(IN/THROUGH OUT/OUT) jacks
The unit
(rear)
TRIGGER
+12V
TRIGGER
+12V
IN
CH.5 CH.2
R R
IN
THROUGH
OUT BAL. UNBAL.
THROUGH
CH. SELECTOR CH. SELECTOR
OUT OUT
CH.5 CH.6 CH.2 CH.3
12V 0.1A CH.6 R CH.3 R
AUTO POWER
STANDBY
OFF
ON
IMPEDANCE
SELECTOR
BAL. UNBAL.
SELECTEUR
D'IMPEDANCE
OUT
12V 0.1A
• To connect multiple devices to the TRIGGER jacks, you need to prepare commercially-available monaural
mini-plug cables.
Trigger Out
(+12 V)
Pre-amplifier
(such as
CX-A5000)
Trigger In
(+12 V)
Another
power
amplifier
System connection
input
Subwoofer
Other functions
9
En