Yamaha DSP-AX2 Bedienungsanleitung Seite 62

DSP Parameter
S. LIVENESS (Surround Liveness)
Function .............. This parameter adjusts the apparent reflectivity of the virtual walls in the surround sound field.
RC. INIT. DLY (Rear Center Initial Delay)
Function .............. This parameter adjusts the delay between the direct sound and the first reflection in the rear center sound field.
RC. ROOM SIZE (Rear Center Room Size)
Function .............. This parameter adjusts the apparent size of the rear center sound field.
RC. LIVENESS (Rear Center Liveness)
Function .............. This parameter adjusts the apparent reflectivity of the virtual wall in the rear center sound field.
REV. TIME (Reverberation Time)
Function .............. This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at
1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.
Description ......... Set a longer reverberation time for "dead" sources and listening room environments, and a shorter time for "live"
sources and listening room environments.
Sound Source
REV. DELAY (Reverberation Delay)
Function .............. This parameter adjusts the time difference between the beginning of the direct sound and the beginning of the
reverberation sound.
Description ......... The larger the value, the later the reverberation sound begins. A later reverberation sound makes you feel like you are
in a larger acoustic environment.
60
Sound Source
Reverberation
Early Reflections
60 dB
REV. TIME REV. TIME
Short
Reverberation
Small value = 1.0 s
Sound Source
(dB)
Reverberation
REV. REV TIME
DELAY
Reverberation
60 dB 60 dB
REV. TIME
Long
Reverberation
Large value = 5.0 s
60 dB
Time
Control Range 0 –10
Control Range 1 – 49 msec
Control Range 0.1 – 2.0
Control Range 0 – 10
Control Range 1.0 – 5.0 sec
Control Range 0 – 250 msec