Advanced Setup; Changing The Advanced Setup Menu Parameters - Yamaha RX-397 Bedienungsanleitung

ADVANCED SETUP

■ ADVANCED SETUP menu parameters
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Factory presets PRESET
Use to reset all parameters to the factory presets.
Choices: CANCEL, RESET
• Select CANCEL if you do not want the parameters of
this unit to be initialized when you reset the factory
presets.
• Select RESET if you want all of the parameters of this
unit to be initialized when you reset the factory presets.
Notes
• This setting does not affect the parameters in the ADVANCED
SETUP menu.
• The resetting process starts next time you turn on the power of
this unit.
Tuner TU
(Asia and General models only)
Use to switch the frequency step selection according to the
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• North, Central and South America:
AM10/FM100 (kHz)
• Other areas: AM9/FM50 (kHz)
28
ADVANCED SETUP
Changing the ADVANCED SETUP
menu parameters
The ADVANCED SETUP menu is displayed in the front
panel display.
y
• During the ADVANCED SETUP procedure, audio output is
muted.
• During the ADVANCED SETUP procedure, only
STANDBY/ON, A/B/C/D/E and the preset station number
buttons (1 and 2) on the front panel are operational.
STANDBY
/ON
1,2,5
1
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
2
Press and hold A/B/C/D/E on the front panel
and then press STANDBY/ON.
This unit is turned on, and the ADVANCED SETUP
menu appears in the front panel display.
A/B/C/D/E 1 2 3 4 5
INPUT BASS TREBLE
0 0
PHONES SPEAKERS
1 1 1 1
2 2 2 2
A B
3 3 3 3
4 4 4 4
– 5 5 + – 5 5 +
2,4 3
STANDBY
/ON
While holding down,
A/B/C/D/E
press
FM/AM l TUNING h
PURE DIRECT TAPE MONITOR
EDIT MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L
16 16
20 20 12 12
6 7 8 VOLUME
26 26 8
BALANCE LOUDNESS
0 FLAT 40 40 4
1 1 1
–30dB
2 2 2 10
3 3 3 9
60 60 2
4 4 4 8 ∞
0
L 5 5 R 5 7
6 -dB -dB
STANDBY
/ON