Cleaning The Motor Fi Lter - Cleanmaxx BT-ZW-9028-E08 Gebrauchsanleitung

Cleaning the motor fi lter
The motor fi lter is a fl eece fi lter and it sits in the dust bag container
1. Pull the mains plug out of the plug socket and open the dust bag container by pres-
sing the release button. Pull the dust bag container cover up.
3. Clean the fi lter under clear running water. Then allow the fl eece fi lter to dry. CAUTI-
ON: Do not under any circumstances clean the fi lter in a washing machine or dish-
washer! Then shake off any excess water and let the fi lter dry completely in the air
before you insert the fi lter again.
4. Then insert the fl eece fi lter in the fi lter insert into the dust bag container and close
the container.
3. Pull the dust bag retaining bracket and remove it with the
full dust bag by pulling it upwards.
4. Pull the dust bag out of the dust bag retaining bracket and
dispose of it.
5. Insert a new dust bag into the dust bag retaining bracket
in such a way that the arrow on the dust bag points down-
wards.
6. Push the dust bin bracket back into the dust bin.
7. Make sure that the dust bag retaining bracket sits correctly
in the dust bag container. If the dust bag is not inserted
correctly, the cover of the dust bag container cannot close
correctly.
2. The fl eece fi lter sits in the rear part of the dust bag con-
tainer, behind the dust bag. Pull the fi lter insert up
and
remove the fi lter.
25