Problem
Low suction force.
Dust escapes from the de-
vice during cleaning.
During vacuum cleaning, an
unpleasant smell is detected.
Technical data
Article Number:
Model:
Voltage supply:
Output:
Protection class:
Disposal
The packaging can be recycled. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. Dis-
pose of it at a recycling centre for used electrical and electronic devices.
You can obtain more information from your local authorities.
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany
Tel.: +49 38851 314650 *)
*) Calls subject to a charge.
All rights reserved.
Possible cause/solution
•
Is the exhaust air valve in the handle open? Close
it.
•
Is the suction force dial set to a low level? Turn the
dial.
•
Is the dust bag full? Change the dust bag.
•
Are the fi lters heavily soiled? Clean them.
•
Is the nozzle, the telescopic tube or the suction
hose clogged? Pull out the mains plug and clear
the clogging.
•
Check whether the fi lters are inserted correctly
and whether the dust container is closed correctly.
Also check whether the dust bag is inserted cor-
rectly. Correct this if necessary.
•
A smell often develops when new devices are fi rst
used. The smell should disappear after you have
used the device several times
Z 09138
BT-ZW-9028-E08
230 V ~ 50 Hz
700 W
II
28