Cleanmaxx BT-ZW-9028-E08 Gebrauchsanleitung Seite 19

❐ Switch the device off immediately and pull the mains plug from the mains socket
if you stop working with the device for a period of time,
– if you are no longer using the device,
– before you change the attachments,
– if a fault or error occurs while the device is in operation,
– if liquids or foreign bodies have found their way into the device,
– before a thunderstorm,
– before you clean parts of the device and accessories.
❐ The device must be switched off when inserting or removing the mains plug.
❐ Always pull the plug and never the lead!
❐ Never pull the device by the cable to move it. Use the handle.
❐ Do not try to lubricate the rollers with lubricant or oil. This would cause dust and dirt
to increasingly adhere to the rollers.
❐ Replace the dust bag as soon as it is full. Also clean the motor fi lter and the exhaust
air fi lter at regular intervals in order to prevent overloading of the motor.
❐ Nozzles and fi lters must be completely dry before you insert them again, use the
device or store it away.
❐ Use only original manufacturer's accessories.
❐ Store the device in a cool and dry place that is not accessible to children and animals
when it is not being used.
19