Cleaning The Dust Fi Lter; Cleaning The Exhaust Fi Lter - Cleanmaxx Zyklon EV-805-S14 Gebrauchsanleitung

Cleaning the dust fi lter
The dust fi lter is located in the dust bin.
1. Remove the suction hose from the dust bin (see chapter "Assembly", section "Insert-
ing/removing the hose").
2. Push the release button on the dust bin and pull it out of the device by the handle.
3. Empty the dust bin as described in the the previous section.
8. If necessary, rinse the dust fi lter out thoroughly with clean, lukewarm water.
ATTENTION: Do not in any case clean the fi lter in the washing machine or dish-
washer! Then shake off any remaining water and let the fi lter air dry completely
before reinstalling it.
9. If necessary, wipe out the dust bin cover with a damp cloth.
10. Place the dust fi lter back on the dust fi lter cover and turn into place.
If the fi lter is damaged or worn, you can order a new fi lter at
www.service-shopping.de.
Cleaning the exhaust fi lter
The exhaust fi lter is located in the compartment on the bottom of the vacuum cleaner
(see chapter "Product contents and device overview", section "Rear view").
1. Press the catch toward the compartment cover and remove the cover.
2. Remove the exhaust fi lter from the compartment and its holder.
3. Tap the exhaust fi lter out over a garbage bin and brush off any loose dirt. If neces-
sary, wipe out the compartment with a damp cloth.
4. If necessary, rinse out the exhaust fi lter thoroughly with clean, lukewarm water.
ATTENTION: Do not in any case clean the fi lter in the washing machine or
dishwasher! Then shake off any remaining water and let the fi lter air dry completely
before reinstalling it.
09242_de-gb-fr-nl_V0.indb 26 09242_de-gb-fr-nl_V0.indb 26
4. Turn the dust bin cover to remove it. NOTE: Orientation
marks for the removal and placement of the cover are pro-
vided on the cover and dust bin. You can remove the cov-
er when the mark on the dust bin is pointing towards the
open lock symbol on the cover.
5. Pull the dust bin cover with the dust fi lter out.
6. Turn the dust fi lter to decouple it from the dust bin cover.
7. Tap out the dust fi lter over a waste bin.
11. Place the dust fi lter cover with the dust fi lter back in the
dust bin and turn it until fi rmly tightened. The cover is
properly in place when the mark on the dust bin is pointing
towards the closed lock symbol on the cover.
12. Then insert the dust bin back in the device. Make sure
that the dust bin locks into place properly.
26
06.06.2014 12:33:26 06.06.2014 12:33:26