Emptying The Dust Bin; Cleaning The Dust Bin, Dust Fi Lter And Plastic Dust Fi Lter - Cleanmaxx Zyklon 09271 Gebrauchsanleitung

Emptying the dust bin

1. Remove the suction hose from the dust bin (see chapter "Assembly", section "Inser-
ting/removing the hose").
Cleaning the dust bin, dust fi lter and plastic dust fi lter
1. Remove the suction hose from the dust bin (see chapter "Assembly", section "Inser-
ting/removing the hose").
09271_DE-GB-FR-NL_V1_1.indb 27 09271_DE-GB-FR-NL_V1_1.indb 27
2. Push the release button on the dust bin and pull it out of
the device by the handle.
3. Hold the dust bin over an open garbage bin. The dust bin
should be as close as possible to the garbage bin so that
dust from the dust bin only falls into the garbage bin and
is not dispersed in the surrounding area.
4. Slide the button to open the dust bin. The bottom of the
dust bin will open and the dirt will fall out.
5. Shut the bottom of the dust bin again. The fastener must
audibly lock into place.
2. Push the release button on the dust bin and pull it out of
the device by the handle.
3. The dust fi lter is located in the dust container lid, that me-
ans on the plastic dust fi lter. Turn the dust bin cover to
remove it. NOTE: Orientation marks for the removal and
placement of the cover are provided on the cover and dust
bin. You can remove the cover when the mark on the dust
bin is pointing towards the open lock symbol on the cover.
4. Remove the dust fi lter for cleaning. Tap out the contents
of the dust fi lter over a dustbin and brush off the loose
dirt. If necessary, wipe the dust fi lter using a damp cloth.
Never clean the dust fi lter with water!
27
17.04.2014 11:34:57 17.04.2014 11:34:57