Before Initial Use; Unpacking The Items; Assembly - Cleanmaxx BT-ZW-9028-E08 Gebrauchsanleitung

Before initial use

Before you can use this device, you must:
• unpack the items supplied,
• assemble the device.

Unpacking the items

PLEASE NOTE!
❐ Danger of suffocation! Keep the packaging material away from children and animals.
Unpack all parts and check the scope of supply for completeness (see the "Overview of
the device and scope of supply" chapter); also check for transport damage. If you fi nd
any damage to the components, do not use them (!), but contact our Customer Service
department.

Assembly

PLEASE NOTE!
❐ The device must always be switched off when you are assembling the device, taking
it apart or changing nozzle attachments.
3. Push the telescopic locking latch in the direction of the arrow. Hold the slide bar in
position and pull the telescopic tube out to the length you want. Release the slide bar
so that the telescopic extension can lock in place.
Tip: All nozzle attachments can also be fi tted directly onto the handle without
any extension from the telescopic tube.
1. Connect the suction hose to the suction hose connection.
Insert the suction hose into the hose connection and turn
it clockwise, until it lhas correctly locked into place.To re-
move the hose, turn it counter-clockwise and pull out the
suction hose.
2. Plug the telescopic extension tube onto the handle. If you
want to remove the telescopic tube at a later point in time,
simply detach it from the handle.
4. Plug one of the nozzle attachments onto the telescopic
tube. When you want to remove the nozzle attachments
again, simply pull them off the telescopic tube.
22