Annex B: Technical Data - ergoline variobike 550 Gebrauchsanweisung

Annex B: Technical Data
Model:
Operation mode:
Power supply:
Fuses:
Brake principle:
Load range:
Speed range:
Deviation of load:
Load stages:
Time interval:
Saddle height adjustment:
Maximum weight of patient:
Displays:
Pulse measurement:
Calibration:
Calibration protection:
Electrical inputs:
Electrical outputs:
Weight:
Dimensions:
Power consumption:
Protection class:
Applied part:
Classification MDD:
Noise level:
Environment Operation:
Version: 05/02
Operation Manual
Technical Data
variobike 550/550C
continuous operation
230 V, 50 Hz (optional 115 V, 60 Hz)
2 x 0.4 AT at 230V (2 x 0.8 AT at 115V)
Computer-controlled eddy-current brake with torque measurement;
speed-independent as per DIN 13405
20 to 500 watt
30 to 130 rpm
acc. to DIN 13405: max. ± 5% in the range of 25 and 400 W
however: max. ± 3 W in the range of 25 and 100 Watt
acc. to manufacturer:
however:
5 Watt manual, 5 Watt or multiples via program
1 to 99 min.
continuously variable for statures between 120 and 210 cm
120 kg
high resolution LCD display
additional LED display as speed counter for patient
35 – 230 pulse/min
Software via keyboard
Code
Digital control RS 232: 9 pole, SUB-D
opto electronic (pulse recorder): 6 pole, DIN bushing
digital: RS 232, 9 pol., SUB-D
analog: remote start, 6 pole, DIN bushing
53 kg
55 x 100 x 130 cm (W x L x H)
max. 65 VA
I
Type B according to EN 60601-1
class IIa according to 93/42 ECC
less than 70 dbA
temperature + 10...+ 40 °C
relative humidity 13...75%, without condensation
atmospheric pressure 700...1060 hPa
E - 25
variobike 550/550C
max. ± 5% in the range of 20 and 500 W
max. ± 3 W in the range of 20 and 100 W
Operation Manual variobike 550/550C
Art-No: 475.087