Operation: Training Control; Training With Predefined Training Program - ergoline variobike 550 Gebrauchsanweisung

5.

Operation: Training Control

Training with variobike 550/550C
You can select out of 9 predefined programs and 7 different types of training modes. For the specifica-
tions, please refer to
Annex A: "Training Modes on variobike 550/550C".
Additionally, you can also enter new training programs.
The chest-belt: transmitter for the heart rate
Do not train without the chest-belt fitted, as this monitors during the course of the training. The chest-
belt for training should be fitted under the chest directly onto the skin and should fit properly. The belt
switches itself on and off automatically. During the training program, the heart beat signal is transmitted
as an impulse which the variobike 550/550C records.

5.1 Training with Predefined Training Program

Select program type "Training" in "MAIN MENU" via the cursor control buttons,
and confirm with control button „ENTER".
Select menu point „Applic. Prog.",
and confirm with control button „ENTER".
In case another program number is desired, confirm
menu point „Prog. Number" with control button „ENTER"
- the program number is flashing now.
Select program no. via cursor control buttons, and
confirm with control button „ENTER".
The respective settings can be checked in the menu
displayed (see example shown for program number 1).
Start Training:
Press control button „START".
Subsequently, the training mode display is called-up with
graphical display of load and pulse trend.
In the control phase, you should check pulse prior to
starting the training. This control phase is indicated by
time display „A 7".
After a correct resting pulse is shown, the training is
started by pressing control button „START" once more.
The training begins with the warm-up phase, i.e. with fixed
initial load within the first minute.
The patient should start pedaling.
In the first minutes of the warm-up phase, the preprogrammed
limit values (max. load and max. pulse) can be altered by
pressing control button "ENTER".
The display flashes and you can set the desired limit value
using the arrow keys. Each value is confirmed by "ENTER".
Version: 05/02
Operation Manual
Operation: Training Control
E - 17
variobike 550/550C
Operation Manual variobike 550/550C
Art-No: 475.087