Variobike 550/550C: Your Partner For Ergometry, Diagnostic And Training; Ergometry And Diagnostics Using The Variobike 550/550C; External Control And Data Transmission - ergoline variobike 550 Gebrauchsanweisung

Operation Manual
variobike 550/550C
Preface

variobike 550/550C: Your Partner for Ergometry, Diagnostic and Training

A good choice !
With the variobike 550/550C you have selected a medical ergometer that will be a reliable partner for
ergometry and precise diagnosis, as a training ergometer or – in the case of the variobike 550C – for the
individual training of your patients using the chip card. The variobike is also well equipped for external
control via PC or ECG unit.
Please observe carefully the notes on application possibilities as described in this manual. In this way,
the variobike 550/550C will be a good, long-lasting partner free from defects and downtimes.
Your ergoline-team

Ergometry and Diagnostics using the variobike 550/550C

With the variobike 550/550C you can select from 9 freely definable ergometry programs. The variobike
550/550C is equipped with a pedal speed indicator for the patient. The control panel can be turned 180°
so that you can monitor all measured values during the ergometry, and also your patient can observe
their performance in terms of pedal speed.

External Control and Data Transmission

Using the variobike 550/550C connected to an analogue or digital ECG unit or a PC-ECG with ergometry
program, you can achieve a complete ergometry measuring and documentation system.
The variobike 550/550C is equipped with several interfaces. In this way, data can be sent or received
from the variobike in digital form.
As well as pure data transmission from the ergometer, it is also possible to control the variobike exter-
nally via a PC or an ECG. The prerequisite is the compatibility of the connected unit with the interface
protocol of the variobike 550/550C.
E - 5
Version: 05/02 Operation Manual variobike 550/550C
Art-No: 475.087