Wisniowski INTRO 600 Technische Dokumentation Und Beschreibung/Montage Und Bedienungsanleitung Seite 20

EN
[D000271] 22. FAQ
Diode on transmitter (remote control) is off
Control system does not react to signal from operative transmitter (remote control)
Control system operates correctly but door does not move
Drive does not stop upon contact with barrier
Drive stops immediately after starting
Door does not stop at open/close position
Drive opens but does not close, photocells are connected
In final closing phase – door opens
In final opening phase – door closes
If you have any doubts or recurring problems, please contact an authorised service outlet.
20
Assembly and Operating Instructions – Drive unit for garage doors INTRO
Reason
• Replace batteries, possibly replace the transmitter.
• Check controller feed.
• Program transmitter.
• Check chain mesh with rack.
• Check if manual drive may be opened.
• Check overload rate adjustment.
• Check overload rate adjustment.
• Check limit switches function.
• Check photocells connection.
• Check photocells.
• Check limit switches function.
• Check overload rate adjustment.
• Check limit switches function.
• Check overload rate adjustment.
IIiO/INTRO/01/2017/ID-95874
Solution
Technical Description
+