Technical Data - REMS Power-Press Betriebsanleitung

eng
Electrical device complies with protection class II
Environmental friendly disposal

1. Technical Data

Intended use
WARNING
REMS radial presses are intended for the purpose of making press joints of all
common pressfitting systems.
REMS cropping tongs are intended for the purpose of cropping threaded bars up to
the strength class 4.8 (400 N/mm²).
REMS cable shears are intended for the purpose of cropping electric cables
≤ 300 mm² (Ø 30 mm).
REMS axial presses are intended for the purpose of making compression sleeve
connections.
REMS pipe expanders are intended for the purpose of expanding and calibrating
pipes.
REMS batteries are intended for supplying energy to the REMS cordless drive units
and the REMS cordless LED lamp.
Rapid chargers are intended for charging the REMS batteries.
All other uses are not for the intended purpose and are prohibited.
1.1. Scope of Supply
Electrical radial presses/pipe expanders: Drive unit, instruction manual, sheet
steel case
Cordless presses/pipe expanders: Drive unit, Li-Ion battery, Li-Ion/Ni-Cd rapid
charger, instruction manual, sheet steel case
1.2. Article numbers
REMS Power-Press SE drive unit
REMS Power-Press drive unit
REMS Power-Press ACC drive unit
REMS Mini-Press ACC drive unit Li-Ion
REMS Akku-Press drive unit Li-Ion
REMS Akku-Press ACC drive unit Li-Ion
REMS Ax-Press 25 ACC drive unit Li-Ion
REMS Ax-Press 25 L ACC drive unit Li-Ion
REMS Ax-Press 40 drive unit Li-Ion
REMS Akku-Ex-Press Cu ACC drive unit Li-Ion
REMS Akku-Ex-Press P drive unit Li-Ion
REMS Akku-Ex-Press P ACC drive unit Li-Ion
REMS Akku-Ex-Press Q & E ACC drive unit Li-Ion
REMS Power-Ex-Press Q & E ACC drive unit
Expanding device 6 – 40 mm, ½ – 1½"
Expanding device 54 – 63 mm, 2"
REMS battery Li-Ion 14.4 V, 1.6 Ah
REMS battery Li-Ion 14.4 V, 3.2 Ah
Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W
Voltage supply Li-Ion 230 V, , for 14.4 V batteries
Sheet steel case, REMS Power-Press SE
Sheet steel case, REMS Power-Press
Sheet steel case, REMS Power-Press ACC
Sheet steel case, REMS Mini-Press ACC
Sheet steel case, REMS Akku-Press / REMS Akku-Press ACC
Sheet steel case, REMS Ax-Press 40
Sheet steel case, REMS Akku-Ex-Press Q & E
Sheet steel case, REMS Ax-Press 25 ACC / Ax-Press 25 L ACC
Sheet steel case, REMS Akku-Ex-Press Cu ACC
Sheet steel case, REMS Akku-Ex-Press P / Akku-Ex-Press P ACC
Sheet steel case, Combi Set REMS Ax-Press 25 ACC
and Akku-Ex-Press P ACC
1.3. Capacity
REMS Mini-Press ACC Radial press for making press joints in all
standard press fitting systems on steel pipes, stainless steel
pipes, copper pipes, plastic pipes, composite pipes
Radial presses REMS Power-Press / Power-Press ACC and
REMS Akku-Press / Akku-Press ACC for making press joints in
all standard press fitting systems on steel pipes, stainless steel
pipes, copper pipes, plastic pipes, composite pipes
Axial presses for making compression sleeve joints (sliding
sleeve joints) on stainless steel pipes, steel pipes, copper
pipes, plastic pipes, composite pipes
REMS Akku-Ex-Press Q & E ACC for expanding of
pipes/coil for the system Uponor Quick & Easy
REMS Power-Ex-Press Q & E ACC for expanding of
pipes/coil for the System Uponor Quick & Easy
REMS Akku-Ex-Press Cu ACC for expanding and
calibrating copper pipes
REMS Akku-Ex-Press P and REMS Akku-Ex-Press P ACC
for widening plastic pipes, composite pipes
Operating temperature range
REMS cordless presses
Battery
Rapid charger
Mains operated presses
1.4. Thrust
Thrust of radial presses, without Mini radial press
Thrust REMS Mini-Press ACC
Thrust REMS Ax-Press 25 ACC
Thrust REMS Ax-Press 25 L ACC
Thrust REMS Ax-Press 40
Thrust REMS Akku-Ex-Press Cu ACC / P / P ACC / Q&E ACC
Thrust REMS Power-Ex-Press Q & E ACC
The specified forces are nominal forces.
1.5. Electric Data
REMS Power-Press SE
REMS Power-Press
REMS Power-Press ACC
REMS Power-Ex-Press Q & E ACC
REMS Mini-Press ACC
REMS Ax-Press 25 ACC / 25 L ACC
REMS Akku-Ex-Press Cu ACC
REMS Akku-Ex-Press P
REMS Akku-Ex-Press P ACC
REMS Akku-Ex-Press Q & E ACC
REMS Akku-Press, Akku-Press ACC
REMS Ax-Press 40
Rapid charger Li-Ion/Ni-Cd
572101
577001
577000
578001
571003
Voltage supply
571004
573003
573004
1.6. Dimensions
573006
REMS Power-Press SE
575006
REMS Power-Press, Power-Press ACC 365×235×85 mm (14.4"×9.2"×3.3")
575009
REMS Mini-Press ACC
575008
REMS Akku-Press, Akku-Press ACC
575005
REMS Ax-Press 25 ACC
575007
REMS Ax-Press 25 L ACC
575100
REMS Ax-Press 40
575101
REMS Akku-Ex-Press Cu ACC
571545
REMS Akku-Ex-Press P,
571555
Akku-Ex-Press P ACC
571560
REMS Akku-Ex-Press Q & E ACC
571565
REMS Power-Ex-Press Q & E ACC
570280
1.7. Weights
570280
570280 REMS Power-Press SE drive unit
578290 REMS Power-Press / ACC drive unit
571290 REMS Mini-Press ACC drive unit without battery
573282 REMS Akku-Press / ACC drive unit without battery
578290 REMS Ax-Press 25 ACC drive unit without battery
578290
REMS Ax-Press 25 L ACC drive unit without battery
578290
REMS Ax-Press 40 drive unit without battery
578290
REMS Akku-Ex-Press Cu ACC drive unit without battery
REMS Akku-Ex-Press P / ACC drive unit without battery
573284
REMS Akku-Ex-Press Q & E ACC drive unit without batt. 2.0 kg
REMS Power-Ex-Press Q & E ACC drive unit
REMS battery Li-Ion 14.4 V, 1.6 Ah
REMS battery Li-Ion 14.4 V, 3.2 Ah
Pressing tongs (average)
Ø 10 – 40 mm
Pressing tongs Mini (average)
Ø ½ – 1¼"
Pressing heads (pair, average)
Expanding head (average)
Adapter tong Z2
Adapter tong Z4
Ø 10 – 108 mm
Adapter tong Z5
Ø ½ – 4"
Pressing ring M54 (PR-3S)
Pressing ring U75 (PR-3B)
Ø 12 – 40 mm
1.8. Noise information
Emission at workplace
REMS Power-Press SE
Ø 16 – 40 mm
REMS Power-Press / ACC
Ø ⅜ – 1½"
REMS Mini-Press ACC
REMS Akku-Press /ACC
Ø 16 – 63 mm
REMS Ax-Press 25 ACC / L ACC
Ø ½ – 2"
REMS Ax-Press 40
REMS Akku-Ex-Press Cu ACC
Ø 8 – 42 mm
Ø ⅜ – 1¾" REMS Akku-Ex-Press P / ACC
REMS Akku-Ex-Press Q & E ACC
Ø 12 – 40 mm REMS Power-Ex-Press Q & E ACC L
–10 °C – +60 °C (14 °F – +140 °F)
–10 °C – +60 °C (14 °F – +140 °F)
0 °C – +45 °C (32 °F – +113 °F)
–10 °C – +60 °C (14 °F – +140 °F)
230 V 1~; 50 – 60 Hz; 450 W; 1.8 A
110 V 1~; 50 – 60 Hz; 450 W
S3 20% (AB 2/10 min)
all-insulated, interference-suppressed
14.4 V =; 1.6 Ah
14.4 V =; 3.2 Ah
14.4 V =; 3.2 Ah
Input 230 V~; 50 – 60 Hz; 65 W
Output 10.8 – 18 V – ---
Input 100 – 120 V~; 50 – 60 Hz; 65 W
Output 10.8 – 18 V – ---
Input 230 V~; 50 – 60 Hz
Output 14.4 V – ---; 6 A – 33 A
430×118×85 mm (16.9"×4.6"×3.3")
288×260×80 mm (11.3"×10.2"×3.1")
338×290×85 mm (13.3"×11.4"×3.3")
295×260×80 mm (11.6"×10.2"×3.3")
325×260×80 mm (12.8"×10.2"×3.1")
330×320×85 mm (13"×12.6"×3.3")
265×260×80 mm (10.4"×10.2"×3.1")
275×260×80 mm (10.8"×10.2"×3.1")
290×260×80 mm (11.4"×10.2"×3.1")
420×245×81 mm (16.5"×9.6"×3.2")
4.7 kg
4.6 kg
2.1 kg
3.8 kg
2.6 kg
2.8 kg
5.4 kg
2.3 kg
2.0 kg
5.6 kg
0.3 kg
0.5 kg
1.8 kg
1.2 kg
0.3 kg
0.2 kg
2.0 kg
3.6 kg
3.8 kg
3.1 kg
2.7 kg
L = 76 dB L = 87 dB
pA WA
L = 81 dB L = 92 dB
pA WA
L = 73 dB L = 84 dB
pA WA
L = 74 dB L = 85 dB
pA WA
L = 73 dB L = 84 dB
pA WA
L = 74 dB L = 85 dB
pA WA
L = 73 dB L = 84 dB
pA WA
L = 73 dB L = 84 dB
pA WA
L = 73 dB L = 84 dB
pA WA
= 81 dB L = 92 dB
pA WA
eng
32 kN
22 kN
20 kN
13 kN
30 kN
20 kN
34 kN
(10.4 lb)
(10.0 lb)
(4.5 lb)
(8.3 lb)
(5.6 lb)
(6.1 lb)
(11.8 lb)
(5.0 lb)
(4.4 lb)
(4.4 lb)
(12.2 lb)
(0.6 lb)
(1.1 lb)
(3.9 lb)
(2.6 lb)
(0.6 lb)
(0.4 lb)
(4.8 lb)
(7.8 lb)
(8.2 lb)
(6.7 lb)
(5.9 lb)
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB
K = 3 dB