ZyXEL NBG4115 Bedienungsanleitung Seite 57

The following table describes the labels shown in the Status screen.
Table 20 Web Configurator Status Screen
LABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
System Status
System Uptime
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
User's Guide
DESCRIPTION
This is the System Name you enter in the Maintenance > System >
General screen. It is for identification purposes.
This is the firmware version and the date created.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - None.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - On, Off or Off by
scheduler.
This shows a descriptive name used to identify the NBG4115 in the
wireless LAN.
This shows the channel number which you select manually.
This shows the channel number which the NBG4115 is currently using
over the wireless LAN.
This shows the level of wireless security the NBG4115 is using.
This shows the IEEE 802.11 standard that the NBG4115 supports.
Wireless clients must support the same standard in order to be able to
connect to the NBG4115
This shows the WPS (WiFi Protected Setup) Status. Click the status to
display Network > Wireless LAN > WPS screen.
This is the total time the NBG4115 has been on.
This field displays your NBG4115's present date and time.
This displays what percentage of the NBG4115's processing ability is
currently used. When this percentage is close to 100%, the NBG4115 is
running at full load, and the throughput is not going to improve anymore.
If you want some applications to have more throughput, you should turn
off other applications.
This shows what percentage of the heap memory the NBG4115 is using.
This displays the NBG4115 port types. The port types are: LAN and
WLAN.
For the LAN port, this field displays Down (line is down) or Up (line is up
or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.
Chapter 5 AP Mode
57